Peter Electronic Electronic Braking Devices
Since 1976, PETER electronic have consistently specialised in the design and manufacture of electronic components for the open and closed loop control of electric motors.
This innovative range of products is continuously improved and updated and is thus setting a good standard on the pulse of technology. Today, the product spectrum of control devices for three-phase asynchronous and d.c. motors includes soft starters and electronic brakes as well as frequency inverters and thyristor / transistor controllers .
VersiBrake 230/400 - 25/36
Functions of this Unit include:
- control via motor contactor
- standstill detection
- braking current limited to rated device current
- remanence time optimization
- braking current infinitely adjustable
- potential-free output for motor contactor interlocking during braking
- potential-free output for fault signalling relay
Features:
- DC braking with one-way rectification
- controlled by microcontroller
- suitable for all asynchronous motors
- easy mounting, also for retrofitting into existing plants
- wear-resistant and maintenance-free
- rated device current 25A / 36A
- special voltages up to 575V (UL: up to 480V) with Option B
- for snap-mounting onto 35mm top-hat-rail
- degree of protection IP 20
VersiBrake BR 230/400-10....600
Functions of this Unit include:
- DC braking
- control via motor contactor
- 2 separately adjustable parameters braking current, braking time
- potential-free output for motor contactor interlocking during braking
- loadable with 250V/8A
- potential-free output for braking contactor (devices from 40A on)
- loadable with 250V/8A
Features:
- DC braking with one-way rectification
- suitable for all asynchronous motors
- easy mounting, also for retrofitting into existing plants
- wear-resistant and maintenance-free
- special voltages up to 600V (20A-devices)
- special voltages up to 690V (devices from 40A on)
- integrated braking contactor (devices up to 20A)
- for snap-mounting onto 35mm top-hat-rail (devices up to 20A)
- degree of protection IP 20 (BR 230/400 - 10 ... 20)
- degree of protection IP 00 (BR 230/400 - 40 ... 600)
VersiBrake 230/400-40........600
Functions of this Unit include:
- control via motor contactor
- standstill- or time-dependet braking
- signalling relay for exceeded braking times
- braking current adjustments 0...100%, current control
- automatic remanence time optimization
- braking times 0.5 - 320s
- temperature monitoring of heat sink
- potential-free signalling and control outputs
- 2nd braking time 0.5 - 40s selectable
- manual braking stop selectable
Features:
- DC braking with one-way rectification
- contolled by microcontroller
- suitable for all asynchronous motors
- easy mounting, also for retrofitting into existing plants
- wear-resistant and maintenance-free
- special voltages up to 690V
- integrated braking contactor (devices up to 60A)
- degree of protection IP 20
VersiBrake 6/25/30L(LP)
Functions of this Unit include:
- start braking via detection of motor voltage and via motor contactor (double safety)
- overload protection
- braking current cutoff after motor standstill
- braking current control
- automatic remanence time optimization
- braking current infinitely adjustable 10-100%
- potential-free output for motor contactor interlocking during braking; also usable to energize the star contactor during braking
- standstill threshold adjustable; individual adaptable to different motor types
Featuures:
- DC braking with one-way rectification
- suitable for all asynchronous motors and for mono phase motors
- controlled by microcontroller
- easy mounting, also for retrofitting into existing plants
- wear-resistant and maintenance-free
- integrated braking contactor
- printed circuit-board version with fault signalling contact
- for snap-on mounting onto 35mm DIN rail
- degree of protection: case version IP 20, printed circuit-board version (LP) IP 00
- meets trade assoc. requirements for category 2 acc. to EN 954-1 according to the test principles of woodworking machines GS-HO-01 and is already certified
VersiBrake 6/25/30LT
Functions of this Unit:
- direct online start via motor contactor
- overload protection
- braking current control
- automatic remanence time optimization
- braking current infinitely adjustable 10-100%
- braking interrupt is possible
- restart 1,2s after braking interrupt
- braking time adjustable
- potential-free output for motor contactor interlocking during braking;also usable to energize the star contactor during braking
Features:
- DC braking with one-way rectification
- suitable for all asynchronous motors and for mono phase motors
- controlled by microcontroller
- easy mounting, also for retrofitting into existing plants
- wear-resistant and maintenance-free
- integrated braking contactor
- for snap-on mounting onto 35mm DIN rail
- degree of protection IP 20
- successor for braking devices type BR and BR-L
Combined Motor Start & Braking Device
These units combine an Electronic Soft Start unit together with an Electronic Braking device. The range includes the VersiComb II, MiniStart and VBMS Units.
Functions include:
- potential-free control input for soft start
- potential-free control input for braking
- braking current adjustments, current control
- standstill detection adaptable to motor via potentiometer
- 3 separately adjustable parameters
starting torque, acceleration time, braking current - motor contactor interlocking during braking
- temperature monitoring of heat sink
Features:
- two-phase controlled soft starter
- integrated by-pass relay
- reduction of starting current peaks
- DC braking via controlled thyristor bridge
- integrated braking contactor
- integrated standstill detection
- deceleration time monitoring
- controlled by microcontroller
- suitable for all asynchronous motors
- for snap-mounting onto 35mm DIN rail
- degree of protection IP 20
- meets trade assoc. requiremants for category 2 acc. to EN 954-1 and is already certified